Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell 2400MP User Manual

NOTE:
If you press the power button while the projector is running, the "Power
Off the Lamp?" message appears on the screen. To clear the message, press any
button on the control panel or ignore the message; the message disappears after 5
seconds.

Adjusting the Projected Image

Raising the Projector Height

Press the elevator button.
1
Raise the projector to the desired display angle, and then release the button to
2
lock the elevator foot into position.
Use the tilt adjustment wheel to fine-tune the display angle.
3

Lowering the Projector Height

Press the elevator button.
1
Lower the projector, and then release the button to lock the elevator foot into
2
position.
1 Elevator button
2
Elevator foot
3
Tilt adjustment wheel
Using Your Projector 15