Table of Contents
Advertisement
Special Dialing Features
Dialing Long Phone
Numbers
Entering a Dialing
Delay
3
Storing a Temporary
Tone
Storing a Switchhook
Flash
Storing Custom Calling
Codes
32
AT&T 882 Manual
Directory
You can store numbers longer than 16 digits in different
lines of an entry. Press
Dial
number is highlighted. Wait for dialing to stop.
Highlight the other line and press
You can program a pause/delay into a directory number
for use with certain banking and long-distance services,
or to obtain an outside line when using a business
telephone system. To insert a dialing delay in a phone
number you are storing, press ÒPÓ or a ÒWÓ on the
alpha key pad.
Each time you press ÒPÓ, a delay of a few seconds
occurs in the dialing sequence. ÒWÓ inserts a pause
of 30 seconds. While the number is dialing, pressing
during the Wait will cause the Wait to end.
Dial
If you have selected the pulse dialing mode, you may
store the TONE signal as part of the number. For
example, you may store a dialing sequence that includes
the phone number you will dial in pulse mode followed
by the TONE signal and any additional number you
will dial in tone mode.
As you store the dialing sequence in the phone,
press
, on the dial pad, at the appropriate point in
TONE
the sequence.
You can use the switchhhook flash to activate custom-
calling services, such as call waiting or 3-way calling.
You may store a switchhook flash as part of a custom-
calling dialing sequence. Press
pad, at the appropriate point in the sequence. If you
program a
into a directory number and the
FLASH
phone doesnÕt wait long enough for dial tone before
dialing, enter a pause after the
pause, press ÒPÓ on the alpha
key pad.
You can use a directory entry for the codes that activate
a custom calling service. Follow the steps to ÒAdding
a NameÓ on page 28. Instead of typing a phone number,
enter the Custom Calling code.
when the first part of the
.
Dial
on the dial
FLASH ,
. To enter a
FLASH
Hide quick links:
Advertisement
Table of Contents
