Setting Up The Phone; Setting The Clock; Entering Your Home Phone Numbers; Determining Line 1 And Line 2 - AT&T 882 User Manual

3 Setting Up the Phone

1

Setting the Clock

Entering Your Home Phone Numbers

Determining Line 1 and Line 2

One Phone Number Operation

6
AT&T 882 Manual
Installation
When the phone is first plugged into the power plug, the
ÒSet-UpÓ menu will appear. You may have to adjust the
Display Contrast. (see page 23)
1 SELECT "Set Clock " from the Set-Up menu.
2 Enter the time then A for AM or P for PM.
3 Press .
4 Enter the current date.
5 Press .
6 When you are done press the soft key below Done.
1 Highlight "Enter Home Phone Numbers".
2 Press SELECT.
3 Enter your 3 digit area code , then press
4 Enter the phone number for Line 1, then press
5 Enter the phone number for Line 2, then press
6 Press the soft key below Done .
If you have a two-line jack follow the procedure below to
determine which line is Line 1 and Line 2.
Press LINE 1 and call one of your phone numbers.
If you hear a busy signal, Line 1 is the number
you called. If Line 2 rings, it is the number you called.
If you have only one telephone number make line choice
1 Highlight "Line choice is".
2 Press SELECT to alternate between AUTOMATIC
and MANUAL.
3 Press the soft key below Done when you are done changing
settings.
.
.
.
.
MANUAL