Installation With Optional Pedestal Base Or Stacking Kit; Optional Accessories - Kenmore 796.8219 Series Use & Care Manual

INSTALLATION WITH OPTIONAL PEDESTAL BASE
OR STACKING KIT
IMPORTANT:
: If you are installing your dryer using
an optional pedestal base or stacking kit, please refer
to the instructions on page 32-33 in this manual, or
refer to the instructions included with the accessory.
Required Dimensions for Installation
With Pedestal
51 1/2"
(130.9 cm)
30 1/5"
(76.7 cm)

OPTIONAL ACCESSORIES

Use a pedestal to make
laundry easier to reach.
White = 796.51022
Ginger = 796.51028
Chili Pepper = 796.51029
Titanium = 796. 51027
Blue Silver = 796. 51025
INSTALLATION INSTRUCTIONS
4"
(10 cm)
Use the stacking kit to mount
the dryer on top of the washer
to save floor space
D26 17002 (White)
D26 17008 (Ginger)
D26 17009 (Chili Pepper)
Canada only
D26 18992 (Titanium)
9
Required Dimensions for Installation
With Stacking Kit
1" 27"
(2.5 cm) (68.6 cm)
Use the LP CONVERSION KIT
for changing the dryer gas
connections from Natural Gas
Use the side vent kit for
(NG) to Liquefied Propane Gas
venting directly on either
(LP)
side or on the bottom.
383EEL3002D
Kit # D26-49670
NOTE: Installation of the LP
conversion kit must be
performed by a qualified
service professional.
77 "
(190.5 cm)
1"
(2.5 cm)