Installation With Optional Pedestal Base Or Stacking Kit; Optional Accessories - Kenmore 796. 8147 Use & Care Manual

INSTALLATION WITH OPTIONAL PEDESTAL BASE OR STACKING KIT

IMPORTANT: If you are installing your dryer using
an optional pedestal base or stacking kit, refer to the
instructions included with the accessory.
Required Dimensions for
Installation with Pedestal
52 ½ in.
(133.4 cm)
30 1/4 in.
(76.7 cm)

OPTIONAL ACCESSORIES

Use a pedestal to make
laundry easier to reach.
White = 796.51022
Ginger = 796.51028
Chili Pepper = 796.51029
4 in.
(10 cm)
Use the stacking kit to
mount the dryer on top of
the washer to save floor
space.
White = D26 17002
Ginger = D26 17008
Chili Pepper = D26 17009
INSTALLATION INSTRUCTIONS
Required Dimensions for
Installation with Stacking Kit
1 in.
(2.5 cm)
Use the side vent kit
for venting directly to
either side or to the
bottom. Gas dryers
can only vent to
the left.
Kit # D26-49670
9
6 in.
(15.2 cm)
76 in.
(193 cm)
1 in.
27 in.
(2.5 cm)
(68.6 cm)
Use the LP conversion kit
for changing the dryer gas
connections from natural
gas (NG) to propane gas (LP).
Part No. 383EEL3002D
NOTE: Installation of the
LP conversion kit must be
performed by a qualified
service technician.