Configuring Tcp/Ip; Configuring Tcp/Ip In Windows 2000 - Motorola SURFboard SBV5222 User Manual

Introduction

Configuring TCP/IP

The SURFboard Digital Voice Modem contains all required software. You do not need to configure the digital voice
modem, but you must be sure that your computer is configured for
computers). Perform one of the following:
•

"Configuring TCP/IP in Windows 2000"

•
"Configuring TCP/IP in Windows XP"
• Windows Vista users, to obtain the TCP/IP configuration and verification,
please consult help system.
•
Follow the instructions in your Macintosh or UNIX user manual
After configuring TCP/IP, perform one of the following to verify the
•
"Verifying the IP Address in Windows 2000 or Windows XP" on
•
Follow the instructions in your Macintosh or UNIX user manual
Your cable provider may provide additional instructions to set up your computer.
Configuring TCP/IP in Windows 2000
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus. The Control Panel window is displayed:
In the steps that follow, a connection number such as 1, 2, or 3 is a reference displayed on PCs with multiple
network interfaces. PCs having only one network interface may display only the label Local Area Connection.
SBV5222 SURFboard® Digital Voice Modem
Installation Troubleshooting
TCP/IP
on page 17
on page 21
IP
Glossary
(a protocol for communication between
address:
page 25
License
17