Page 1
Jetstream ABS Hand Dryer Model JET11W Instruction Manual Version 1.0 Jan 2015...
Page 2
Jetstream ABS Hand Dryer 1. INTRODUCTION Thank you for purchasing a Hyco Jetstream ABS high speed automatic hand dryer. Recent research and developments in hand dryer technology have given greater emphasis on air flow, minimising hand drying times and lowering energy consumption.
Page 3
THIS APPLIANCE CAN BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.
Page 4
2. Mark and drill four holes, following the diagram below. Insert the wall plugs provided. 155mm 1300mm 212mm FLOOR 3. Position the hand dryer back plate over the four holes and feed the mains cable through the hole in the back plate, located above the terminal block. 4.
Page 5
4. USER OPERATION 1. Ensure on/off power switch is set to ON position. 2. Shake off excess water from wet hands. 3. Hold wet hands directly below the air outlet, approximately 12cm away; this will start the unit automatically. Rub hands together until dry. 4.
Page 6
5. CARE AND MAINTAINANCE DURING USER MAINTENANCE PLEASE ENSURE THAT THE MAINS SUPPLY IS SWITCHED OFF. NEVER USE ABRASIVE CHEMICALS OR MATERIAL TO CLEAN THE HAND DRYER 1. Clean the exterior of the hand dryer using a soft damp cloth. 2.
This product is guaranteed against faulty materials and manufacture for a period of one year from the date of purchase. Hyco will in its sole discretion replace, repair or refund any faulty unit. Incorrect installation, frost damage, and the consequences of limescale deposits are excluded.
Page 8
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed out dustbin. Hyco Manufacturing Ltd Normandy Court, Express Way Castleford,WF10 5NR Sales: 01924 225 200...
Need help?
Do you have a question about the JET11W and is the answer not in the manual?
Questions and answers