Configuring Tcp/Ip In Windows 95, 98, Or Me - Motorola SURFboard SB4220 Series User Manual

Introduction Before You Begin
Home Print
Installation & Configuration
Configuring TCP/IP in Windows 95, 98,
or Me
The following instructions are for Windows 95, 98 and Me. For Windows 2000 or XP, see
"Configuring TCP/IP in Windows 2000 or XP"
system, refer to your user guide.
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network icon on the Control Panel window.
4
Select the Configuration tab on the Network window.
5
If TCP/IP is displayed in the list of network components, it is installed and you can
skip to step 10. If TCP/IP is not displayed on the list, continue with step 6.
X
Exit
Troubleshooting
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
23
SURFboard Cable Modem SB4220 Series User Guide
FAQ Glossary
on page 26. For a Macintosh or UNIX
License