Before You Begin - Motorola SURFboard SB4220 Series User Manual

Introduction

Before You Begin

Home Print
Installation & Configuration
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard cable modem:
Item
Power cord
10/100Base-T
Ethernet cable
USB cable
SURFboard Cable
Modem CD-ROM
You will need 75-ohm
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
the cable modem. The coaxial cable and RF splitter are available at consumer electronic
stores. To connect your SB4220 to an Ethernet hub as described in
Users" on page 33, you may need a crossover cable. Check the documentation provided
with your hub.
X
Exit
Troubleshooting
Description
Connects the SURFboard cable modem to the AC
electrical outlet
Connects to the
Connects to the
Contains the User Guide and USB drivers
coaxial cable (coax) with F-type connectors to connect your cable
splitter and two additional coaxial cables to use both the TV and
4
SURFboard Cable Modem SB4220 Series User Guide
FAQ Glossary License
Ethernet port
USB port
"Cabling for Multiple