Introduction
Before You Begin
Home
Print
Installation & Configuration
Setting Up a USB Driver in Windows 98, continued
4
Be sure "CD-ROM drive" is the only box checked, as in the window at top left.
5
Click Next. The message "Please wait while Windows searches for a new driver for
this device" is displayed.
If your computer successfully locates the driver, you can skip to step 8.
6
If your computer does not locate the driver, the previous window is displayed again.
Select Specify a location and type the location of your CD-ROM drive as shown at
bottom left.
To load the driver successfully, you may need to click Browse to manually select the
SB4220.sys file on the CD-ROM.
7
Click Next.
X
Exit
Troubleshooting
13
SURFboard Cable Modem SB4220 Series User Guide
FAQ
Glossary
License