Motorola SURFboard SB4220 Series User Manual page 19

Introduction Before You Begin
Home Print
Installation & Configuration
Setting Up a USB Driver in Windows 98, continued
8
Select The updated driver... and click Next.
If this window is not displayed, verify that the SURFboard Cable Modem CD-ROM is
properly inserted in the CD-ROM drive. If you still cannot find the correct driver file,
click Cancel to cancel the installation and perform the procedure for
USB Driver from Windows 98 or Me"
9
After the window at bottom left is displayed, click Next.
If a window with the message Copying Files... displays and asks for your CD-ROM
drive, type your CD-ROM drive letter (for example, "D:") and click OK.
If an Insert Disk window similar to the one below is displayed, Windows 98 system
files are needed to complete the installation. To install the files, insert your
Windows 98 CD-ROM is in the CD-ROM drive and click OK.
X
Exit
Troubleshooting
on page 38. Then repeat this procedure.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
14
SURFboard Cable Modem SB4220 Series User Guide
FAQ Glossary License
"Removing the