Chapter 5: Manager / Engineering / Service Modes; Manager Mode - Matrix S3x-01 Service Manual

CHApter 5: MANAger / eNgINeerINg / SerVICe MoDeS

5.1 MANAger MoDe oVerVIeW
1) To enter Manager Mode, press & hold the UP and DOWN level keys at the same time for 3-5 seconds until Manager Mode appears on the
display.
2) To enter the Manager Mode, press SELECT once Manager Mode appears on the display.
3) To scroll between options in the Manager Mode, press the UP or DOWN level key.
4) Press SELECT to modify the program settings once displayed.
5) Press the UP or DOWN level key to change value.
6) Once the program setting is correct, press START to save.
7) Press and the START key twice to exit Manager Mode..
CUSTOM SETTINGS
MAxIMUM TIME
DEFAULT TIME
DEFAULT LEVEL
DEFAULT WEIGHT
SPEED IS MILE / KM
MACHINE
CARDIO ON / OFF
ACCUMULATED DISTANCE
ACCUMULATED TIME
LANGUAGE
SOFTWARE VERSION
ERROR LOG
SHUTDOWN TIME
10
DEFAULT MINIMUM
60 5
60 5
L1 L1
150 LB / 68 KG 80 LB / 36 KG
MILE KM
ST ST
ON OFF
N/A N/A
N/A N/A
ENGLISH N/A
N/A N/A
N/A N/A
10 SEC 5 SEC
MAxIMUM
95 Maximum workout duration.
95 (LIMITED Default start time in all programs.
TO MAx TIME
SETTING)
L26 Default level used in all programs.
400 LB / 182 KG Default weight used in calorie calculations
and HR programs.
MILE Measure unit used for calorie calculations,
distance, and speed.
ST Should always be set for Stepper (ST)
ON Controls the Entertainment Port power in the
back of the console.
65,000 MILES / Total distance on the stepper, not editable.
104,000 KM
65,000 HOURS Total time on the stepper, not editable.
N/A Sets the language shown on the console.
N/A Displays the current Software Version of the
console.
N/A Displays the error history on the console.
30 SEC Determines the amount of time the console
will display workout information after workout
is complete before resetting the console.
DESCRIPTION