Table of Contents
Advertisement
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to control the camera from a distance. In
addition to turning the camera on and off and navigating the menu, you can control various shooting-
related functions, such as aperture, shutter speed, and custom picture settings, like knee and
sharpness. For details on how to connect and use the remote controller, refer to its instruction manual.
Visit your local Canon Web site to download the latest version.
1 Set the Q switch to OFF and connect the remote controller to the camera.
2 Set the Q switch to ON.
NOTES
• The following controls on the remote controller will not operate the camera: ONSCREEN button,
REC REVIEW button, SHUTTER SELECT button, AGC button, AUTO KNEE button, AF button,
AUTO IRIS button and ZOOM dial.
• If you plan on connecting the optional RC-V100 Remote Controller to the camera using the optional
RR-10 or RR-100 8-pin Remote Cable, check the serial number of the RC-V100. If the serial
number starts with "01 xxxx" (where xxxx represents other digits), you will need to update the
remote controller's firmware. Canon will perform this feature upgrade, and requires that RC-V100
Remote Controller be sent to an accredited Canon service center. Shipping and handling charges
may apply. Contact a Canon Customer Support Center for details.
• When connecting the optional RC-V100 Remote Controller to the camera, make sure that the
remote controller's terminal selection switch is set to match the terminal to be used on the camera.
Using the Optional RC-V100 Remote Controller
To the RC-V100's
REMOTE A terminal
Remote cable
(supplied with the
RC-V100)
RR-10 or RR-100 8-pin
Remote Cable (optional)
To the RC-V100's
REMOTE B terminal
47
Advertisement
Table of Contents
