Table of Contents
Advertisement
To set the near end of the range
3 Adjust the focus to the desired position for the near
end of the range.
4 Open the [Near] focus limit submenu.
[Camera Setup] > [Focus Limit] > [Near]
• When a focus limit has not been set, [Limit Off] will appear
on the [Focus Limit] submenu screen. When it has been
set, [Limit On] will appear.
5 Select [Set] and then press the joystick.
• Select [Reset] instead to clear the focus position currently set for the near end.
• Select [Cancel] instead to cancel the operation.
NOTES
• If the limits for the near end and far end conflict, the one most recently set will take precedence and
the other will be cleared. For example, if you set a limit for the far end and then you set one for the
near end that is further, the limit for the far end will be cleared.
• When you activate one-shot AF after setting a focus limit, if no subject can be focused on within the
range, the focus will return close to the position where it was prior to activating one-shot AF.
• If you operate the zoom after setting a focus limit, the position of the focus limit will change. Set the
focus limit again.
Adjusting the Focus
[Camera Setup]
[Focus Limit]
[Near]
45
Advertisement
Table of Contents
