Table of Contents
Advertisement
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function. For some
functions, you may need to perform other procedures. Refer to the function's reference page below,
as necessary.
Assignable Functions
Function name
The camera automatically focuses (one-shot AF function) while the button is held
[One-Shot AF]
pressed down.
The camera automatically adjusts the aperture only while the button is held
[Push Auto Iris]
pressed down.
[ABB]
Starts the procedure for automatic black balance adjustment.
[AE Shift +]
Compensates the exposure making the image brighter.
[AE Shift –]
Compensates the exposure making the image darker.
[Color Bars]
Turns color bars on/off.
Enters the direct setting mode with the white balance highlighted and ready to be
[Set WB]
adjusted.
Activates the digital tele-converter in the following sequence:
[Tele-converter]
2x
[Infrared]
Turns infrared mode on/off.
[External Rec]
Outputs a recording command to an external recorder to start or stop recording.
[Custom Picture]
Opens the [Custom Picture] submenu.
[Camera Mode A/M]
Switches the camera mode between [Auto] and [Manual] .
4x
Off
Description
Assignable Buttons
A
43
34
22
35
28
40
–
46
55
50
33
49
Advertisement
Table of Contents
