Replacing The Remote Control Battery - Canon ELPH IXUS Manual

Replacing the Remote Control Battery
Replace the battery when the shutter no longer releas¬
es with the remote control.
Battery: One lithium battery {CR2032, 3V)
While pressing the bat¬
tery compartment but¬
ton. pull out the battery
compartment.
Load a new battery and
replace the battery com¬
partment.
•Remove the expired
battery and insert the
new one with the + and
- terminals positioned
correctly.
• The operating distance when directly facing the
camera is approximately 5 m (16.4 ft.)
• Remote control shooting is possible lor approx, four
minutes while ><•— is cKspla^ in the LCD panel.
■ Place the camera on a steady surface or use a tripod.
■ Remote control shooting may not be possible If the
remote control signal receptor Is exposed to strong
sunlight or fluorescent lighL In this case, use the self-
timer to take the picture, or move the camera to a
different location.
11-45