Table of Contents
Advertisement
Slope
[Sharpness]
Sets the sharpness level. This setting can be adjusted from –10 to 50. (Default: ±0)
[Noise Reduction]
Reduces the amount of noise that appears in the image. Select a level from 1 (lowest level) to 12
(highest level), or select [Off] to turn the noise reduction off. (Default: [Off])
[White Balance]
Adjusts the amount of white balance throughout the whole image.
[R Gain]: Adjust the intensity of red tones. This setting can be adjusted from –50 to 50. (Default: ±0)
[B Gain]: Adjust the intensity of blue tones. This setting can be adjusted from –50 to 50. (Default: ±0)
NOTES
• When an optional RC-V100 Remote Controller is connected to the camera, the following custom
picture settings can be changed using the buttons and dials on the remote controller.
- [Black] > [Master Pedestal], [Master Black Red], [Master Black Blue]
- [Black Gamma]
- [Knee] > [Slope], [Point]
- [Sharpness]
- [White Balance] > [R Gain], [B Gain]
Input
Custom Picture Settings
Point
Input
53
Advertisement
Table of Contents
