Table of Contents
Advertisement
Menu item
[ND Mode]
[Automatic], [Manual]
Determines how the ND filter level is adjusted when the camera mode is set to
[Auto].
[Automatic]: The ND filter level is adjusted automatically by the camera.
[Manual]: The ND filter level is adjusted manually (A 39).
[Periph.Illum.Corr.]
[On], [Off]
(Peripheral
When this setting is set to [On] and the camera has correction data for the
illumination
attached lens, it compensates for the darkening of the image's corners
correction)
(peripheral illumination drop) due to the lens's characteristics (A 24).
[Custom Picture] menu
Menu item
[Select File]
[Off], [CP1] to [CP6], [EOS Std.], [Wide DR], [Canon Log]
Selects a custom picture file to apply its settings while shooting or to edit it.
[Fine Tuning]
See the detailed explanations on pages 51 to 53.
[Audio/Video Setup] menu
Menu item
[MIC Power]
[On], [Off]
When this setting is set to [On], the camera supplies power to a plug-in power
microphone connected to the MIC terminal (A 58).
• Supplying power to a microphone without plug-in power functionally may
[1kHz Tone]
[-12dB], [-18dB], [-20dB], [Off]
Outputs a 1-kHz audio reference signal from the 3G/HD-SDI terminals and
HDMI OUT terminal.
[3G-SDI Mapping]
[Level A], [Level B]
Allows you to select a 3G-SDI mapping level, as defined by the SMPTE ST
425-1 standard, for the output of the 3G/HD-SDI terminals.
[Rec Command]
[On], [Off]
When this setting is set to [On], you can use an assignable button set to
[External Rec] or an optional RC-V100 Remote Controller to output a recording
command to an external recorder connected to the camera to start or stop
recording (A 55).
IMPORTANT
damage the microphone.
Submenu / Setting options
Submenu / Setting options
Submenu / Setting options
Menu Options
61
Advertisement
Table of Contents
