Head Lamp High/Low Beam; Head Lamp Flash; Auto Head Lamp (If Equipped) - Mahindra 2014 Scorpio S6 Owner's Manual

FEATURES AND CONTROL

8.13 Head Lamp High/Low Beam

A Low Beam
With the head lamp low beam ON, push the lighting control stalk down (away) from
steering wheel to switch ON the head lamp high beam. The head lamp high beam
telltale lamp in the instrument cluster illuminates indicating high beam option
selected.
With the head lamp high beam ON, pull the lighting control stalk up towards the
steering wheel to switch ON the head lamp low beam.
Your vehicle head lamps are vented and moisture may be collected on the
inside of the head lamp lens under certain climatic and geographical conditions.
This moisture will evaporate once the head lamps have been switched ON for a
few minutes.
8-8
W12H18
High Beam
B

8.14 Head Lamp Flash

Pull the lighting control stalk (from the head lamp low beam position) towards the
steering wheel to instantaneously flash the head lamp high beam. The head lamp
flash works even when the head lamp is OFF.

8.15 Auto Head Lamp (if equipped)

The auto head lamp button is located in the switch bank below the HVAC controls.
Auto head lamp switches ON the head lamp based on the outside ambient light
W12H19
FATC
W12H73
© Copyright Mahindra & Mahindra Ltd. 082014