Head Restraint - Mahindra 2014 Scorpio S6 Owner's Manual

SEATS AND SEAT BELTS
While adjusting the seat, make sure the latch engages fully and the seat is
locked firmly in the desired position. An unlocked seat may move in a sudden
stop or collision, causing injury to the person in that seat. Push and pull on the
seat to be sure it is locked.
5.1.3 Front Seat Recline
To adjust the seat back, lift the lever located on the outboard side of the seat, lean
back, and release the lever at the desired position. To return the seat back, lift the
lever, lean forward, and release the lever.
The seat belts provide maximum protection in a frontal or rear collision when
the occupants are sitting up straight and well back in the seats. If you are
reclined, the lap belt may slide past your hips and apply restraint forces directly
to the abdomen, or the shoulder strap may contact your neck. The more the
seat is reclined, the greater the risk of serious injury.
5-2
5.1.4 Driver Seat Height Adjust (if equipped)
W12E03
Lift/Push the seat height adjustment lever located on the outboard side of the driver
seat to raise/lower the seat. Adjust the seat height such that you can depress the
clutch pedal completely.

5.2 Head Restraint

The head restraint comprises of the padded portion which contacts your head and is
inserted/locked in receptacles on the top of the seat back.
Your vehicle seats are equipped with head restraints which are vertically adjustable.
The purpose of these head restraints is to restrain rearward motion of the head in a
collision.
When returning a extremely reclined seat back to its upright position, make
sure you support the seat back while operating the lever.
It is recommended to adjust the seat height only when the vehicle is stationary.
W12E29
© Copyright Mahindra & Mahindra Ltd. 082014