Bulb Specification; Fuses And Relays - Mahindra 2014 Scorpio S6 Owner's Manual

GENERAL

2.4 Bulb Specification

Lamp Bulb
Head Lamp - Low Beam
Head Lamp - High Beam
Front Turn Signal Lamp
Side Turn Signal Lamp (Fender)
Static Bending Lamp
Front Position Lamp
High Mount Stop Lamp
Brake Lamp
Rear Turn Signal Lamp
Rear Position Lamp
Reversing Lamp
Front Fog Lamp *
Rear License Plate Lamp
Interior Lamps Bulb
Puddle Lamps
* select models only, subject to LED serviceability

2.5 Fuses and Relays

A fuse is the most common electric protection device. The fuse is placed in an
electrical circuit, so that when current flow exceeds the rating of the circuit/fuse, it
blows off. The element in the fuse melts, opening the circuit and preventing other
components of the circuit from being damaged by the over current. The size of the
metal fuse element determines the rating. Once a fuse blows off, it must be replaced
with a new one.
2-6
Wattage No. of Bulbs per Vehicle
H7 55W 2
H7 55W 2
21W 2
5W 2
H1 55W 2
LED* / 5W LED* / 2
LED* / 10W LED* / 2
LED* LED*
16W 2
LED* LED*
16W 2
35W 2
5W 2
10W 1
LED* LED*
Switch the ignition and all electrical equipment OFF before touching or attempting to
change a fuse.
Replacement fuse must be with the same rating as the one you have removed.
You can identify a blown fuse by a break in the filament. All fuses except high
current fuses are press fit.
Never touch fuses with bare hands. Always use a fuse puller to remove and
refit the fuses. The fuse puller is available in the IP fuse box.
Be careful while removing the relay, do not shake or apply excessive force to
avoid damage to relay terminal.
Three fuse boxes in the vehicle;
• Battery Mounted Fuse Box
• Engine Compartment Fuse Box
• Instrument Panel Fuse Box
W12B05
© Copyright Mahindra & Mahindra Ltd. 082014