Technical Specification; Torque Specification - Mahindra Thar CRDe Repair Manual

Repair Manual
THAR CRDe BS-IV

Technical Specification

0
Fuel temperature C: (for diesel engine at the injection pump inlet.)
Minimum
Maximum
Fuel feed: {By fuel injection}
Injection system description
Working principle: intake manifold/ direct
injection/ injection pre-chamber/swirl
chamber/others
Fuel Pump
Make(s) and Country of origin (if imported)
HP Pump & ECU Type
Pressure / Characteristic diagram
Injection advance curve (Diagram to be
enclosed.)
Injectors
Type(s) (mention holder, nozzle
Make and Country of origin
Injection piping
Length mm
Internal diameter mm

Torque Specification

Location
High pressure pipe pump to Rail
High pressure pipe to Rail
High Pressure Pipe to injector
Injector holder clamping
Rail mounting on intake manifold
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra
& Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
-10 °C
70 °C
Common Rail Direct Injection.
Direct Injection
Bosch, India.
Bosch CRS 2.2/ CP1H with EDC 16C
1. Radial plunger High Pressure Pump.
Part ID No: 0 445 010 131
2. Common Rail
Part ID No: 0 445 214 168.
Electronic controlled
Electronic controlled.
Solenoid type
Bosch, India.
1) Pump to rail = 400 mm,
2) Rail to Injector = 250 mm
1) Pump to rail = 3.0 mm,
2) Rail to Injector = 2.4 mm
Torque in Nm (lbf-ft)
20 ± 2 Nm ( 15±1 lbf-ft)
35 Nm (26 lbf-ft)
27±2 Nm (20± 1 lbf-ft)
25±3 Nm (18 ± 2 lbf-ft)
22.5±2.5 Nm ( 16.5 ± 2 lbf-ft)
Page 108
190
MAN-00
MAY 2012
/Rev 1