Zte ZXV10H108L User Manual page 8

Table of Contents

Advertisement

First approach: Acquire an IP address automatically from H108L via DHCP.
l
a. In the Internet Protocol (TCP/IP) Properties dialog box, check Obtain an IP ad-
dress automantically and Obtain DNS server address automatically.
b. Click OK to save configuration.
Second approach: Specify a static IP address for PC.
l
a. In the Internet Protocol (TCP/IP) Properties dialog box, check Use the following
IP address to set the IP addresses of PC and H108L to the same network segment,
in the form of 192.168.1.x (x is an integer between 2 to 254).
For example, IP is set to 192.168.1.2, subnet mask is set to 255.255.255.0, and
both default gateway and DNS server are set to 192.168.1.1.
b. Click OK to save configuration.
Configuring Wireless
3.3 Configuring
Configuring
1. The PC is able to connect to WLAN network when it is equiped with wireless network card.
2. Before the PC is able to get connected with a WLAN network, the installation and configu-
ration of wireless network card must be completed.
3. The wireless network card will search for wireless networks automatically after installation
and configuration is completed. The PC will be ready for use after search succeed. If
encryption is enabled on H108L, users will be prompted for corresponding encryption key.
Restoring Default
3.4 Restoring
Restoring
If the device fails to function or users forget their login password due to incorrect configurations,
the problem can be resolved by restoring default settings.
Refer to the label on the bottom of device for detailed default setting parameters.
1. When the device is operating normally, keep pressing the Reset button for more than 5
seconds (using a needle or a pin).
2. The system will restore default settings and restart automatically.
4 4 4
WEB
WEB Configuration
WEB
4.1 Login/Logout
Login/Logout
Login/Logout
H108L provides Web-based configuration, which enables users to configure and manage
H108L via Web browser.
1. Type
http://192.168.1.1
address bar of IE browser and press Enter. Then the Login page shown in the following
figure pops up.
Wireless Connection
Wireless
Default Settings
Settings
Default
Settings
Configuration
Configuration
(the default IP address of the LAN-side interface of H108L) in the
Connection
Connection
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents