Boiler/Group 2 - Viessmann VITODENS 200-W Service Instructions Manual

Boiler/Group 2

"2" - select for constant temperature control units (see page 53).
Coding
Coding in the delivered condition
01:1 Do not adjust (only for
constant temperature
control units)
04:1 Minimum burner pause
subject to the boiler load
(specified by boiler cod-
ing card)
06:... Maximum limit of the
boiler water temperature,
specified in °C by the
boiler coding card
0d:0 Do not adjust
0E:0 Do not adjust
13:1 Do not adjust
14:1 Do not adjust
15:1 Do not adjust
21:0 No service interval (hours
run) selected
23:0 No time interval for
burner service
24:0 No display "Service"
indication
28:0 No burner interval igni-
tion
2E:0 Do not adjust
(cont.)
Possible change
04:0 Minimum burner pause set
permanently (specified by
boiler coding card)
06:20 Maximum limit of the boiler
to water temperature within
06:127 the ranges specified by the
boiler
21:1 The number of hours run
to before the burner should
21:100 be serviced is adjustable
from 100 to 10 000 h
One adjusting step ≙
100 h
23:1 Interval adjustable from 1
to to 24 months
23:24
24:1 Display "Service" indica-
tion (address is automati-
cally set and must be man-
ually reset after the serv-
ice)
28:1 Time interval adjustable
to from 1 to 24 h. The burner
28:24 is force-started once every
30 s (only when operating
with LPG)
Code 2
63