Checking The Static And Supply Pressure - Viessmann VITODENS 200-W Service Instructions Manual

Further details regarding the individual steps
yes
Automatic calibra-
tion of the com-
bustion controller
For further fault details, see page 91.

Checking the static and supply pressure

Danger
CO build-up as a result of an incorrect burner setup can have serious health
implications.
Carry out a CO test prior to and after work on gas equipment.
Operation with LPG
Flush the LPG tank twice during commissioning/replacement. Thoroughly vent the
tank and gas supply lines after flushing.
Commissioning, inspection, maintenance
no Fault Eb
(cont.)
Initiate a heat
draw-off. Switch
the boiler OFF and
ON again.
Press reset button
R.
15