KERN MGB 150K100 Operating Manual

Bathroom balance
Hide thumbs Also See for MGB 150K100:

Advertisement

Quick Links

Operating Manual
Bathroom Balance
KERN MGB
Version 1.0
08/2008
GB
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
email: info@kern-sohn.com
MGB Bild
Phone: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
MGB-BA-e-0810

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGB 150K100 and is the answer not in the manual?

Questions and answers

Summary of Contents for KERN MGB 150K100

  • Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 email: info@kern-sohn.com Internet: www.kern-sohn.com Operating Manual Bathroom Balance KERN MGB Version 1.0 08/2008 MGB Bild MGB-BA-e-0810...
  • Page 2: Table Of Contents

    KERN MGB 150K100 Version 1.0 08/2008 Operating Manual Bathroom Balance Table of Contents Technical Data__________________________________________________ 3 Basic Information (General)_______________________________________ 4 Proper use _______________________________________________________ 4 Improper Use ____________________________________________________ 4 Warranty ________________________________________________________ 4 Basic Safety Precautions _________________________________________ 5 Pay attention to the instructions in the Operation Manual________________ 5 Transportation &...
  • Page 3: Technical Data

    1 Technical Data KERN MGB 150K100 Readability (d) 0.1 kg Weighing range (max) 150 kg Weighing Units kg, lb Accuracy +- 0.5% +- 0.1kg Battery operated 1 x CR2032 ( 3V ) Electric Supply 5 years at 3 weighings daily...
  • Page 4: Basic Information (General)

    The balance may only be used according to the described conditions. Other areas of use must be released by KERN in writing. 2.3 Warranty Warranty claims shall be voided in case...
  • Page 5: Basic Safety Precautions

    Stepping on the edge of the weighing plate may cause tilting of balance or fall of person. Carefully read this operation manual before setup and commissioning, even if you are already familiar with KERN balances. 4 Transportation & Storage 4.1 Testing upon acceptance When receiving the appliance, please check packaging immediately, and the appliance itself when unpacking for possible visible damage.
  • Page 6: Unpacking

    If electro-magnetic fields or static charge occur, or if the power supply is unstable major deviations on the display (incorrect weighing results) are possible. In that case, the location must be changed. 5.2 Unpacking Take the whole balance out of their packaging and place them at the intended position.
  • Page 7: Error Message

    Remove dirt immediately. 8.2 Service, maintenance The appliance may only be opened by trained service technicians who are authorized by KERN. 8.3 Disposal Disposal of packaging and appliance must be carried out by operator according to valid national or regional law of the location where the appliance is used.
  • Page 8: Instant Help

    9 Instant help In case of a fault in the program sequence, the balance should be shortly switched off. The weighing process must then be restarted from the beginning. Help: Fault Possible cause The displayed weight does • The balance is not switched on. not glow.

Table of Contents