Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN MBC Series
Summary of Contents for KERN MBC Series
- Page 1 KERN & Sohn GmbH Ziegelei 1 Tel: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com Internet: www.kern-sohn.com Operating instructions Baby scale KERN MBC Type MBC 15K2DM Type MBC 20K10M Type MBC 15K2DNM Type MBC 20K10NM Version 1.0 2017-02 MBC-BAPS-e-1710...
-
Page 2: Table Of Contents
KERN MBC Version 1.0 2017-02 Operating instructions Baby scale Contents Technical data ....................4 Declaration of conformity ................6 Appliance overview ..................6 Overview of display ........................7 Keyboard overview ........................8 Basic Information (General) ................9 Proper use ..........................9 Improper Use .......................... - Page 3 Menu ......................21 Navigation in the menu ......................21 Menu overview ........................22 Error messages .................... 25 Service, maintenance, disposal ..............26 11.1 Cleaning ..........................26 11.2 Cleaning / Disinfecting ......................26 11.3 Sterilisation ..........................26 11.4 Service, maintenance ......................26 11.5 Disposal ...........................
-
Page 4: Technical Data
1 Technical data KERN (Type) MBC 15K2DNM MBC 20K10NM Trademark MBC 15K2DM MBC 20K10M Weighing range (max) 6 kg / 15 kg 20 kg Readability (d) 2 g / 5 g 10 g Reproducibility 2 g / 5 g 10 g Linearity ±... - Page 5 KERN (Type) MBC 15K2DM MBC 20K10M Weighing range (max) 6 kg / 15 kg 20 kg Readability (d) 2 g / 5 g 10 g Reproducibility 2 g / 5 g 10 g Linearity ± 2 g / 5 g...
-
Page 6: Declaration Of Conformity
2 Declaration of conformity To view the current EC/EU Declaration of Conformity go to: www.kern-sohn.com/ce 3 Appliance overview 1. Height measuring rod (optional) 2. Bubble level 3. Display Unit 4. LED 5. Baby weighing pan 6. Weighing pan 7. Rubber feet (height adjustable) 8. -
Page 7: Overview Of Display
3.1 Overview of display Display Description Description GROSS Gross weight display Lights up during indication of the gross weight of the baby (after drinking) Net weight display Lights up during indication of the net weight of the baby (before drinking) Illuminated after weighing scale was tared ZERO Zeroing display... -
Page 8: Keyboard Overview
3.2 Keyboard overview Type MBC 15K2DM Type MBC 15K2DNM Type MBC 20K10M Type MBC 20K10NM Description Function ON/OFF-switch Turn on/off Weighing scale will be reset to „0.0“ kg. Zeroing key For numeric entry: • Change decimal place HOLD button Hold function TARE button Tare balance Feeding Function... -
Page 9: Basic Information (General)
The balance may only be used according to the described conditions. Other areas of use must be released by KERN in writing. Do not use the scales for determining body mass in medicine. -
Page 10: Warranty
In KERN’s accredited DKD calibration laboratory test weights and balances may be calibrated (return to the national standard) fast and at moderate cost. For balances with height measuring rods, we recommend a metrological examination of the accuracy of the height measuring rod, however, this is not mandatory as the determination of human body height involves rather large, intrinsic inaccuracies. -
Page 11: Basic Safety Precautions
5.1 Pay attention to the instructions in the Operation Manual Carefully read this operation manual before setup and commissioning, even if you are already familiar with KERN balances. 6 Transport and storage 6.1 Testing upon acceptance When receiving the appliance, please check packaging immediately, and the appliance itself when unpacking for possible visible damage. -
Page 12: Unpacking, Setup And Commissioning
7 Unpacking, Setup and Commissioning 7.1 Installation Site, Location of Use The balances are designed in a way that reliable weighing results are achieved in common conditions of use. You will work accurately and fast, if you select the right location for your balance. -
Page 13: Scope Of Delivery
7.3 Scope of delivery Balance Power pack unit Operating instructions 7.4 Placing Carefully remove the balance from the packaging, remove plastic cover and setup balance at the intended workstation. Make sure that all transport locking devices are removed To loosen the transport guard screw out transport screw [1] anticlockwise. -
Page 14: Rechargeable Battery Operation
Levelling Level balance with foot screws until the air bubble of the water balance is in the prescribed circle. 7.5 Rechargeable battery operation (is possible by obtaining an optional battery power pack) Open the battery compartment cover (1) at the base of the display unit and insert the rechargeable battery pack. -
Page 15: Battery Operation
7.6 Battery operation As an alternative to rechargeable battery operation, the balance may also be operated with 6x AA batteries. Open battery compartment cover (1) at the lower side of the display unit and insert batteries according to the example below. Lock the battery cover again. If the batteries are empty, in the balance display appears the symbol . -
Page 16: Mains Connection
The stated voltage value must be the same as the local voltage. It is allowed to use only admitted, original power supply adaptors of KERN company. The small sticker attached to the side of the display unit indicates the power port: The LED remains illuminated as long as the weighing scale remains connected to the mains. -
Page 17: Operation
8 Operation 8.1 Weighing Start balance by pressing The balance will carry out a self-test The scales are ready for operation as soon as the weight display for “0.0kg“ has appeared. However, you can reset the weighing scale to zero by pressing key. -
Page 18: Hold Function (Standstill Function)
When the balance is unloaded the saved taring value is displayed with negative sign. To delete the stored tare value, release scales and press 8.3 Hold function (Standstill function) The balance has an integrated standstill function (mean value calculation). This allows one to weigh the baby exactly, even if it is not restful in the weighing pan. -
Page 19: Feeding Function (Control Of Weight Gain)
8.4 Feeding function (control of weight gain) The baby's weight can be saved before feeding. Then the weight gain can be calculated by pressing a button. Start balance by pressing Stability display await "STABLE" Place the baby on the weighing pan center before feeding. ... -
Page 20: Use The Optional Size Measurement Device
8.6 Use the optional size measurement device The scale has the ability to determine not only the weight but also the body height using the optional height measuring rod. For this purpose proceed as follows: Put the head stopper (left) (1) to zero (2) ... -
Page 21: Menu
9 Menu 9.1 Navigation in the menu Call up menu Turn on the scale during the self-test press , the first function [F1 oFF] is displayed. Select function With help of , the individual functions can be selected one after the other. -
Page 22: Menu Overview
9.2 Menu overview Function Settings Description F1 oFF oFF 0* Automatic shutdown off Automatic oFF 3 Automatic shutdown after 3 min cutout oFF 5 Automatic shutdown after 5 min Auto Off oFF 15 Automatic shutdown after 15 min Automatic shutdown after 30 min oFF 30 Back lighting for display on F2 bk... - Page 23 duA in dESC C 0.00 P2 CAL C 0.000 C 0.0000 C 0.0 Sd iv 1 div 1, 2, 5, 10, 20, 50 Sd iv 2 div 1, 2, 5, 10, 20, 50 CAP 1 CAP 2 UnLoAd StrAnG St 100 St 200 St 500 duA rA...
- Page 24 P3 Pro Not documented Not documented CoUnt Reset weighing scale to factory setting rESEt Not documented SEtGrA * default setting MBC-BAPS-e-1710...
-
Page 25: Error Messages
10 Error messages Display Description Zero range exceeded (on start-up or when pressing the key) • Load on weighing pan • Excess load, during zero setting of weighing scale • Incorrect adjusting process • Fault on load cell Value outside the A/D changer range •... -
Page 26: Service, Maintenance, Disposal
Sterilisation of the appliance is not allowed. 11.4 Service, maintenance The appliance may only be opened by trained service technicians who are authorized by KERN. Disconnect the scales before opening. 11.5 Disposal Disposal of packaging and appliance must be carried out by operator according to valid national or regional law of the location where the appliance is used. -
Page 27: Instant Help
12 Instant help In case of a fault in the program sequence, the balance should be shortly switched off. The weighing process must then be restarted from the beginning. Failure: Possible causes: The balance is not switched on. The displayed weight does not glow. -
Page 28: Adjustment
1. Carry out adjustment as closely as possible to admissible maximum load of weighing scale. Information about test weights you will find in the internet under http://www.kern-sohn.com • Observe stable environmental conditions. For warm-up time required for stabilisation see chpt 1. - Page 29 Procedure: Turn on the scale during the self-test press , the first function [F1 oFF] is displayed. Press repeatedly until "t CH" is displayed. Press , [Pin] is displayed Operate adjustment switch; for position see chap.13 Press subsequently, [P1 SPd] will appear ...
- Page 30 Ensure that there are no objects on the weighing pan. Wait for stability display "STABLE", then confirm with The size of the currently set adjustment weight is displayed, the active site flashes. (example) If required, select with he digit to be altered and change the digit with Confirm with...