Table of Contents
Advertisement
Mesh Enabled Access
1 Product Introduction
Thank you for purchasing the VMM6300 Vehicle Mounted Modem (VMM). The device is
designed to integrate with the Mesh Enabled Access (MEA) wireless communication system
capable of supporting high data rate mobile communication at variable rates of vehicular
speeds. This document provides detailed installation and configuration instructions for the MEA
VMM6300 device.
The VMM6300 is a wireless modem that has been designed for permanent in-vehicle mounting.
It provides access to the MEA network via an Ethernet connection to mobile data terminals,
laptop computers, or any other device that has an Ethernet port. The VMM operates on 12VDC
and is rugged enough for installation in commercial and public safety vehicles. The VMM
provides the same functionality as the WMC6300 to the connected device, including geo-
location.
The VMM efficiently combines the functionality of a MEA subscriber device and client modem
into a single cost-effective wireless network component. This makes it easy for any Ethernet-
ready device to access a MEA mobile broadband network. Computers, IP video cameras,
sensors, signs, signals, etc. can all be Mesh Enabled to send and receive data at burst rates of
up to 6 Mbps. All standard subscriber device functionality including Multi-Hopping™, non-line-
of-sight communications and geo-location services are fully supported.
The MEA Vehicle Mounted Modem allows connection of multiple IP addressable devices using
standard Ethernet connectivity. This allows devices that cannot accept the PCMCIA based
WMC6300 product to function transparently on a MEA network without additional drivers.
1.1
Product Contents
Each MEA VMM is a full-featured wireless networking device. The following is a list of the items
provided with each VMM:
•
MEA Vehicle Mounted Modem (flange mount)
•
15 foot cable assembly
•
1 Mag Mount 0 dBi antenna.
•
1 N-type to SMA adapter
Vehicle Mounted Modem Users Guide
1
Advertisement
Table of Contents
