External Device Provisioning; Figure 3-10. External Device Provisioning Table - Motorola MEA 3.1 User Manual

Mea 3.1 vehicle mounted modem
Table of Contents

Advertisement

Mesh Enabled Access
Vehicle Mounted Modem Users Guide
3.5

External Device Provisioning

The External Device Provisioning section of the VMM Device Administration page is used to
configure addresses for the attached nodes on the local Ethernet segment.
Up to three
addresses are provisioned.

Figure 3-10. External Device Provisioning Table

The Enable checkbox indicates this row contains a valid address. Any address can be disabled
by clearing the checkbox. The pull-down menu options indicate whether this address will be
offered via the local DHCP service ("Local-DHCP") or "Statically-Provisioned".
The Statically-Provisioned setting is used to support devices that do not use DHCP to acquire
an address.
The MAC address field is used for Local-DHCP addresses, so that the IP address can be
reserved for a specific device. The reserved checkbox must be marked for this kind of IP
address reservation.
The Status field indicates whether the provisioned IP address was
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmm6300

Table of Contents