Framing Construction Exterior Or Chase - New Buck Corporation 80ZC Installation Instructions Manual

Zero clearance cabinet for use with fireplace model 80 only residential installation only

Hide thumbs Also See for 80ZC:

Table of Contents

CONTINUED FRAMING AND INSTALLATION

CONSTRUCTION

FRAMING

2. The 80ZC cabinet exterior roof or chase framing as follows:

NOTE: No floor protector or finished hearth is needed directly under the Model 80ZC Cabinet, only the

hearth protector is needed.

WARNING:

Install the hearth protector or finished hearth extension only as specified. The exten-

sion must extend a minimum of 16" in front of the stove door opening and must be 47 1/2" wide mini-

mum. Refer to (Page 6) for calculation of R, and K values.

EXTERIOR ROOF OR CHASE

FIGURE 18

47 1/2"

41 1/2"

CHIMNEY

STORM COLLAR

ROOF FLASHING

CHIMNEY PIPE

USE FIRE CODE SHEET ROCK

2" X 4" STUDDING

DOUBLE HEADER: A DOUBLE HEADER

MUST BE USED ON A LOAD BEARING WALL.

THIS MUST BE DONE 12"

ABOVE CABINET.

SINGLE HEADER: A SINGLE HEADER MUST BE

USED AS PAT OF FRONT FRAMING. VERTICAL

2" X 4"'s MUST BE TURNED FLAT.

(See Page 19).

Page 18

Table of Contents