Toyota 2013 Avalon Hybrid Owner's Manual page 380

■
License plate light
1
Remove the cover.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
2
Remove the lens.
Insert a properly sized screw-
driver into the hole of the lens,
and pry off the lens as shown in
the illustration.
To prevent damaging the vehi-
cle, wrap the screwdriver with a
tape.
3
Remove the light bulb.
4
When installing, reverse the steps listed.
■
Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
● Headlight low beams (discharge bulb)
● Daytime running lights (vehicles with discharge headlights)
● Side marker lights
● Side turn signal lights
● Stop/tail lights
● High mounted stoplight
● Outer foot lights (if equipped)
AVALON_HV_U (OM41451U)
6-3. Do-it-yourself maintenance
401
6