Toyota 2013 Avalon Hybrid Owner's Manual page 173

192
4-2. Driving procedures
Selecting shift ranges in the S position
To enter S mode, shift the shift lever to S. Shift ranges can then be
selected by operating the shift lever, allowing you to drive in the shift
range of your choosing.
1
Upshifting
2
Downshifting
The selected shift range, from S1
to S6, will be displayed in the
meter.
The initial shift range in S mode is
automatically set to S4 or S5
according to vehicle speed.
■
Shift ranges and their functions
● You can choose from 6 levels of engine braking force.
● A lower shift range will provide greater engine braking force than
a higher shift range. The engine speed will also increase.
● If you accelerate while in ranges S1 to S4, the shift range may
automatically range up in accordance with the vehicle's speed.
■
S mode
●
When the shift range is S4 or lower, holding the shift lever toward "+" sets
the shift range to S6.
●
To prevent the engine from over-revving, upshifting may automatically
occur.
■
Tachometer
When the S mode driving is selected, the
tachometer will be displayed on the multi-
information display. The tachometer dis-
plays the engine speed in revolutions per
minute.
■
Downshifting restrictions warning buzzer
To help ensure safety and driving performance, downshifting operation may
sometimes be restricted. In some circumstances, downshifting may not be
possible even when the shift lever is operated. (A buzzer will sound twice.)
AVALON_HV_U (OM41451U)