Toyota 2013 Avalon Hybrid Owner's Manual page 184

■
The Automatic High Beam can be operated when
The power switch is in ON mode.
■
Camera sensor detection information
●
High beam may not be automatically turned off in the following situations:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another
●
High beam may be turned off if an oncoming vehicle that is using fog lights
without using the headlights is detected.
●
House lights, street lights, red traffic signals, and illuminated billboards or
signs may cause the high beam to turn off.
●
The following factors may affect the amount of time taken to turn high beam
on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• The condition of the road (gradient, curve, condition of the road surface
etc.)
• The number of passengers and amount of luggage
●
High beam may be turned on or off when unexpected by the driver.
AVALON_HV_U (OM41451U)
4-3. Operating the lights and wipers
203
4