Samsung SCV-5083R User Manual page 29

- EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
y DEfog : You can use the defog mode to allow the camera to automatically
detect the fog density of the screen and display a clear image despite
smog, fog or general poor visibility.
❶MM I f the SPECIAL menu screen is displayed, use the Function Setup switch so that
the arrow indicates 'DEFOG'.
❷MM S elect a desired mode using the Function Setup switch.
- AUTO : Adjust the level automatically.
- Manual : Depending on the defog
level set by the user, adjust
the clarity of image. (LOW,
MIDDLE, HIGH)
- OFF : Released state
M
`
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
y PriVaCY : Mask an area you want to
hide on the screen.
❶MM I f the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'PRIVACY'.
❷MM S elect a desired mode using the
Function Setup switch.
- AREA : You can select up to 24
PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
- TRANSPARENCY : Adds or removes transparency from the masking area.
Gray.
DEFOG MANUAL SETUP
LEVEL
▶ 1.
RETURN
2.
PRIVACY AREA SETUP
AREA
▶ 1.
MODE
2.
MASK COLOR
3.
TRANSPARENCY
4.
SEL POS
5.
X POS
6.
Y POS
7.
RETURN
8.
MIDDLE
AREA
1
OFF
GREEN
OFF
L_TOP
18
--------

33
- -------

English_29