Hydraulic Hand Brake - Arctic Cat 650 H1 2010 Operator's Manual

4. After all the oil has been drained,
install the drain plugs and tighten
securely.
CAUTION
Inspect the oil for any signs of
metal filings or water. If found, take
the ATV to an authorized Arctic Cat
ATV dealer for servicing.
5. Pour recommended oil into each
filler hole.
64
CF107B
 NOTE: Arctic Cat recommends
the use of genuine Arctic Cat lubri-
cants.
6. Install the filler plugs.
HYDRAULIC HAND
BRAKE
! WARNING
CF106C
Be sure to inspect the hydraulic
brake system before each use.
Always maintain brakes according
to the Maintenance Schedule.
Brake Fluid
Check the brake fluid level in the brake
fluid reservoir. If the level in the reser-
voir is not visible in the sight glass, add
DOT 4 brake fluid.
 NOTE: If the sight glass appears
CF113A
dark, there is a sufficient amount
CF113A
of fluid in the reservoir.
CAUTION
Be careful not to spill any fluid
when filling the brake fluid reser-
voir. Wipe away spilled fluid imme-
diately.
CF116A
738-420A