Epa Emission Control Statement/Warranty Coverage (U.s.); Warranty Coverage - Arctic Cat 650 H1 2010 Operator's Manual

U.S. EPA EMISSION CONTROL STATEMENT/

WARRANTY COVERAGE

STATEMENT/WARRANTY
Arctic Cat warrants to the original retail purchaser, and each subsequent purchaser, that
all U.S. EPA-certified Arctic Cat ATV's are designed, built, and equipped to conform to all
U.S. EPA Emission Control Regulations. Please read the following information completely.
Your authorized Arctic Cat ATV dealer will repair or replace any defective emission-related
component at no cost to you during the warranty period. You may have non-warranty
service performed by any repair establishment that uses equivalent components. The
regulations provide significant civil penalties for tampering that causes your ATV to no
longer meet U.S. EPA emission standards.
Arctic Cat further warrants that the engine and its emission-related components are free
from defects in materials or workmanship that could cause the engine to fail to comply
with applicable regulations during the warranty period.
If you have any questions about this information, or the emission warranty coverage
statement, contact your local authorized Arctic Cat ATV dealer.
WARRANTY PERIOD
The emission warranty period for this ATV begins on the same date as the standard
warranty coverage and continues for 30 months or 3100 miles, whichever comes first.
COMPONENTS COVERED
The emissions warranty covers major emissions control components and emission-related
components listed as follows:
Engine Management and Sensors
Barometric Pressure Sensor
Camshaft Position Sensor
Engine Control Unit (ECU)
Engine Coolant Temperature Sensor
Intake Air Temperature Sensor
Manifold Absolute Pressure Sensor
Oxygen Sensor
Throttle Position SensorI
Crankshaft Position Sensor
Ignition System
Connectors
Ignition Coil
Knock Sensor System
Spark Plugs
Capacitive Discharge Ignition (CDI) Module
Magneto Pick-Up
OWNER'S RESPONSIBILITIES
The owner of any ATV warranted under this Arctic Cat Emission Control Statement is
responsible for the proper maintenance and use of the ATV as stated in the Operator's
Manual. Proper maintenance generally includes replacement and service, at the owner's
choosing, such items as air filter, oil and oil filter, or any other part, item, or device related
to emissions control as specified in the Operator's Manual. It is the owner's responsibility
to ensure that the ATV is used in a manner for which it was designed.
(U.S. Only)
Fuel/Air System
Fuel Injectors
Fuel Pressure Regulator
Carburetor(s)
Turbocharger Assembly
Air Bypass Valve
Turbo Waste Gate Control Valve
Crankcase Ventilation System
SC Valve
Miscellaneous Items Used in
Aforementioned Systems
Switches
Grommets
Clamps
Hoses
Ties
Gaskets
Wiring
87