Download Print this page
Episode ECS-200-70V-2x2-TR Owner's Manual

Episode ECS-200-70V-2x2-TR Owner's Manual

Commercial ceiling tile replacement speaker

Advertisement

Quick Links

ECS-XXX-70V-2x2-TR
ECS-200-70V-2x2-TR
WELCOME TO EPISODE
Thank you for purchasing a great product from Episode®,
one of the best sounding speaker lines available today. We
appreciate your purchase and are committed to providing
the highest quality products possible.
The
Episode®
Commercial
Replacement models are a superb choice for almost every
type of acoustic ceiling commercial speaker installation.
They have been designed to meet the needs of commercial
audio installation specialists everywhere.
FEATURES
• Easily install an acoustic ceiling speaker in 2x2 ceiling without the need to cut tiles.
Much less install time per speaker.
• Multi tap transformer for fast and easy adjustment.
• High quality speaker materials for great sound and long life.
• Grill color blends perfectly into commercial ceilings.
• ECS-200-70V-2X2-TR is optimal for lower level background music and low frequency ranges.
• ECS-400-70V-2X2-TR is optimal for foreground music, voice and higher frequency ranges.
• ECS-400-70V-2X2-TR can be used as an 8 ohm or 70 volt speaker.

PACKAGE CONTENTS

• (1) ECS-200-70V-2X2-TR or ECS-400-70V-2X2-TR Loudspeaker Assembly
• (1) 3/8" Flex Conduit Connector (pre-installed in ½ inch knockout in access plate)
UL Listed 1480 "Material and construction permits use
where ceiling plenum is part of the air handling system"
Type G–General Signaling
IMPORTANT INSTRUCTIONS AND CONSIDERATIONS FOR INSTALLATION
The installation methods should be in accordance with the applicable section of the National Electrical Code, ANSI/NFPA
70, and/or the National Fire Alarm Code, ANSI/NFPA 72, as applicable. The wiring method and compartment should not
interfere with the operation of the speaker.
pg. 1
ECS-400-70V-2x2-TR
®
Series
In-Ceiling
Episode
Commercial Ceiling Tile Replacement Speaker
®
Tile
OWNER'S MANUAL

Advertisement

loading

Summary of Contents for Episode ECS-200-70V-2x2-TR

  • Page 1: Package Contents

    ® ECS-200-70V-2x2-TR ECS-400-70V-2x2-TR WELCOME TO EPISODE ® Thank you for purchasing a great product from Episode®, one of the best sounding speaker lines available today. We appreciate your purchase and are committed to providing the highest quality products possible. Episode®...
  • Page 2: Tools Required

    Note: Do not use the back plate cavity as a junction for wiring that is not powering the speaker! 4. Set the loudspeaker tap to the appropriate setting using the rotary switch on the back of the loudspeaker. See Transformer Setting for wattage options. There is also a diagram on the speaker for easy reference. 5. Place the loud speaker into the grid opening. Make sure that all 4 sides sit evenly. 6. Attach security tie wire to the edges of the speaker and attach the other ends to the ceiling support system per your local building code. TRANSFORMER SETTING ECS-200-70V-2x2-TR Tap Settings ECS-400-70V-2x2-TR Tap Settings 5 10 Watts 8 ohm 1.25 1/4W 1/2W pg.
  • Page 3: Specifications

    ECS-XXX-70V-2x2-TR SPECIFICATIONS ECS-200-2x2-TR Woofer: 8 inch Hard Fiber Paper Cone Enclosure Material: 1412 CID FP Power Handling: 12 Watts RMS EIA 426A Standard Frequency Response: 65Hz-20KHz EIA 426A Standard Sensitivity 1 W / 1 Meter: 92 dB Calculated Max Output: 98 dB-SPL 4 W / 1 Meter Weight: 7 lbs Grill Type: Baked Epoxy Hybrid Paint Transformer Settings: 1/4w, 1/2w, 1w, 2w, 4w Dimensions: 23 13/16” H x 23 13/16” W x 3 7/16” D Conduit Knockout Size: ½” Trade Size (.866” actual size) ECS-400-2x2-TR Woofer: 6 ½ inch Polypropylene Cone Tweeter: 1” Mylar Enclosure Material: 1412 CID FP Power Handling: 30 Watts RMS EIA 426A Standard Frequency Response: 60Hz-20KHz EIA 426A Standard Sensitivity 1 W / 1 Meter: 90 dB Calculated Max Output: 104 dB-SPL 20 W / 1 Meter...
  • Page 4: Troubleshooting

    This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA). CONTACTING TECHNICAL SUPPORT Phone: (866) 838-5052 Email: Techsupport@snapav.com DIEMENSIONS 23.90in. 3.5in. 130314-1505 © 2013 Episode ® pg. 4 © 2013 Episode ®...

This manual is also suitable for:

Ecs-400-70v-2x2-tr