Seat Belt; Construction And Operation Of The Energy-Absorbing Belt And The Buckle - Mitsubishi 1993 3000GT Technical Information Manual

SEAT BELT

The seat belt has the following mechanisms.
FRONT SEAT BELT
•
3-point belt with ELR (electric type low tension seat
belt)<Vehicies for General Export and GCC>
•
3-point belt with ELR <Vehicles for Europe and
Australia>
•
Buckle built in seat
<Vehicles for Europe>
INTERIOR -
Seat Belt
19F0219
CONSTRUCTION AND OPERATION OF THE
ENERGY-ABSORBING BELT AND THE BUCKLE
The front seat belt has on it a sleeve inside which the seat belt
webbing is folded back over itself in a loop so as to absorb the
energy of a shock by pulling loose and releasing slack. There is a
spring installed in the portion connecting the buckle to the arm,
allowing the buckle to tilt forward and inward so that the belts can be
tight enough around the body.
REAR SEAT BELT
•
3- point belt with ELR
<Vehicles for General Export,
GCC and Australia>
6-9
19F0112