DRIVE-CONTROL COMPONENTS -
FAIL-SAFE AND DIAGNOSIS CODE TABLE
NOTE
1. An "X" indicates normal operation and a "---" indicates stop of control.
2. Control stop, warning display and fixing of damping force return to normal operation when the ignition switch is turned
OFF. However, in the case of breakdowns marked with an asterisk
generated even when the ignition switch is in ON (e.g. transient breakdown). In this case, the self-diagnosis code is in
memory in the ECS control unit even while normal operation resumes.
Electronic Control Suspension (ECS)
normal operation is resumed if normal output is
(*),
3-19