Lenovo ideacentre 700–24ISH Hardware Maintenance Manual page 59

Step 20. To install the new the LCD panel module:
The new LCD panel module including:
a. Line up the chassis with new LCD panel module, place the chassis into position.
b. Connect the converter cable to the connector on the LCD panel.
c. Connect the LVDS cable to the connector on the motherboard.
d. Connect the touch control board cables to the connector on the touch control board.
e. Connect the power switch board cable to the connector on the power switch board.
f. Secure the LCD panel to the chassis with the fourteen screws.
g. Attach the camera to the new LCD module.
h. Line up the rear deco with the guide track on the LCD module, and then slide the rear deco
into position.
i. Secure the rear deco to the new LCD module with the two screws.
j. Secure the rear deco with the
k. Line up the chassis and new LCD panel with the front bezel, and then place it into position.
l. Attach the speaker module to the new LCD module.
Step 21. Reattach the system fan, EMI cover, middle cover, optical drive, computer stand, foot cover
and stand base.
1. LCD panel
2. LVDS cable
3. Touch control board and touch cable.
Chapter 8
53
.
Replacing hardware