Table of Contents
Advertisement
Step 6.
Locate the optical removal notch, and then push the optical drive out using a screwdriver.
Step 7.
Push a small iron stick or paper clip into the small hole on the optical drive cover so that the
disk springs out as shown.
Step 8.
Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk.
1 2
Step 9.
Separate the cover from the defective optical drive.
Step 10. To install the new optical drive:
32
ideacentre All-In-One 700 Hardware Maintenance Manual
Hide quick links:
Advertisement
Table of Contents
