If You Cannot Shift Automatic Transmission Selector Lever - Toyota 2008 Camry Solara Owner's Manual

NOTICE
Use only a cable or chain specifically
intended for use in towing vehicles.
Securely fasten the cable or chain to
the towing eyelets provided.
Before towing, release the parking brake
and put the transmission in neutral. The
engine switch must be in "ACC" (engine
off) or "ON" (engine running).
CAUTION
If the engine is not running, the pow-
er assist for the brakes and steering
will not work so steering and braking
will be much harder than usual.
318
'08 Solara_U (L/O 0802)
If you cannot shift automatic
transmission selector lever
If you cannot shift the selector lever
out of "P" position to other positions
even though the brake pedal is de-
pressed, use the shift lock override but-
ton as follows:
1. Turn the engine switch to "LOCK"
position. Make sure the
brake is on.
2. Pry up the cover with a flathead
screwdriver or equivalent.
3. Insert your finger into the hole to
push down the shift lock override
button. You can shift out of "P"
position only while pushing the but-
ton.
4. Shift into "N" position.
parking
5. Insert the cover.
6. Start the engine. For your safety,
keep the brake pedal depressed.
Be sure to have the system checked by
your Toyota dealer as soon as possible.
2008 CAMRY SOLARA from Feb. '08 Prod. (OM33810U)