Toyota 2008 Camry Solara Owner's Manual page 28

2. Remove the circuit board, then remove
the discharged transmitter battery.
NOTICE
z Take care not to damage the circuit
board.
z Do not bend the terminals.
20
'08 Solara_U (L/O 0802)
3. Put in a new transmitter battery with
positive (+) side up. Install the circuit
board into the transmitter case.
Close the transmitter case securely.
NOTICE
z Make sure the positive side and
negative side of the transmitter bat-
tery are faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
z Be careful not to bend the electrode
when inserting the transmitter bat-
tery and that dust or oils do not
adhere to the transmitter case.
z Close the transmitter case securely.
After replacing the battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
2008 CAMRY SOLARA from Feb. '08 Prod. (OM33810U)