Do you have a question about the FE595 and is the answer not in the manual?
Questions and answers
Joan M Cottrell
March 7, 2025
the back up key will not unlock the door
1 comments:
Mr. Anderson
March 7, 2025
The backup key for the Schlage FE595 will not unlock the door because the key is only used in emergency situations. The lock has a mechanical part that is always locked by default, and unlocking it requires either entering the user code on the keypad or using the thumbturn inside. If the lock is not functioning properly, the key override may be needed, but it is not the primary unlocking method.
This answer is automatically generated
Diane D Amschel
April 17, 2025
I somehow turned off the sound when changing the door code. No beeping, but everything else works?
Page 1
Keypad Locks Programming Guide 23780034 Codes Default Programming Code Código de programación Programming Code (Six Numbers) User Codes (Four Numbers) predeterminado •Used to program the lock. •Used to unlock the lock. Code du défaut programmation •DOES NOT unlock the lock. •Up to 19 possible User Codes can be stored in the lock at a •If you forget the Programming...
Page 2
Lock will not stay in programming mode. An incorrect entry was made during the programming process. * Beeps sound only when beeper is enabled. Need Help? Calling From: keypad.schlage.com Get the free U.S.A.: (888) 805-9837 mobile app at Canada: (800) 997-4734 gettag.mobi...
Need help?
Do you have a question about the FE595 and is the answer not in the manual?
Questions and answers
the back up key will not unlock the door
The backup key for the Schlage FE595 will not unlock the door because the key is only used in emergency situations. The lock has a mechanical part that is always locked by default, and unlocking it requires either entering the user code on the keypad or using the thumbturn inside. If the lock is not functioning properly, the key override may be needed, but it is not the primary unlocking method.
This answer is automatically generated
I somehow turned off the sound when changing the door code. No beeping, but everything else works?