Setting The Clock - Motorola MD4260 User Manual

Setting the Clock

A flashing "CL" in the message window indicates that you must set the correct day and time
at the base unit.
1. Press the DAY/CHECK button. The system announces the day, hour, minute, and the
time of day (e.g., Monday, 7:42 PM).
2. Press and hold the HOUR button until the system announces the correct hour.
NOTE: Be sure to select the correct time of day (e.g., 3 AM or 3 PM). The system
announces the current setting.
3. Press and hold the MIN button to change the minute of the hour. The system
announces the first two minutes sequentially (01, 02), in increments of five (05, 10, 15,
20). The system announces the current setting.
4. Press and hold the DAY/CHECK button to change the day of the week. The system
announces the current setting.
27 27