General; Turn Answering Machine On / Off (Preset To On); Clock Setting; Outgoing Announcement - Motorola ME4067 Series User Manual

General

1. In the idle (standby) mode, press
Turn Answering Machine On / Off
Set the Day and Time
Record your outgoing Announcement
Set your Remote Access code
Set 'Announce Only' On / Off
Turn audible Message Alert On / Off
Set Base ringer On / Off
Set number of Rings to answer
Voice prompt language selection
Press on the base to set the options. The current setting is announced.
2. Once the desired option is reached and the current setting is announced, press
or to change the setting.
3. Press to confirm your setting.
4. At any time, press
Switch Answering Machine ON/OFF (preset to ON)
When you first switch on your phone, the answering machine is in the
1. Press MENU. When you hear the announcement, press
the On/Off setting.

Clock Setting

Follow the steps above to program the current D ay of the w eek , then the H o u r ,
and then the M in u t e :
First, program the D a y . As you program, the display shows ' d ' and a number, 1 to 7,
representing the day of the week. 1 represents Monday; 2 represents Tuesday , and so
on. Press when done.
Next, program the H o u r . Be careful that you program pm hour if the current time is
in the afternoon or evening, or an am hour if the current time is after midnight or in
the morning. Press
Next, program the M inu te. You'll be programming the 'tens' column first. Your choices
are 0 through 5 , as the minutes range from 00 to 59. Press
programming the 'ones' column, where your choices are 0 through 9 . Press
to confirm.
Note: If the mains power to the base is lost, your answer machine will display
"St." (Set time) to remind you adjust the clock when it is switch on.

Outgoing Announcement

You can record 2 different outgoing announcements: A 1 inviting your caller to leave
a message (Announce Only O F F ), and A 2 asking your caller to call back later (Announce
Only O N ).
Outgoing Announcement A 1 is played when Announce Only mode is O F F . Callers
can leave a message in this mode. Your answering machine is preset with Announce
Only set to OFF, allowing callers to leave a message.
Outgoing Announcement A 2 is played when Announce Only mode is O N . Callers
c a n n o t leave a message in this mode.
If you do not record your own announcements, your answering system will play a
38 pre-programmed message to your callers:
to program each of the following options:
to exit setup mode.
when done.
mode.
O N
or to switch between
37
. Now, you are