Character Entry Method - Kyocera FS-4100DN Operation Manual

Character Entry Method

In character entry screens, use the procedure below to enter characters.
Keys Used
Use the following keys to enter characters.
1 [Back] Key: Press this key to return to the screen from which you invoked the character entry screen.
2 Numeric Keys: Use these keys to select the character you want to enter.
3 [Right Select] Key: Press this key to select the type of characters you want to enter. (When [Text] is displayed)
4 Arrow Keys: Use these to select the entry position, or select a character from the character list.
5 [OK] Key: Press this key to finalize the entered character(s).
6 [Clear] Key: Press this key to delete the character at the cursor position. If the cursor is at the end of the line, the
character to the left of it is deleted.
1
2
A-2
Appendix
3
4
5
6