Kyocera FS-4100DN Operation Manual page 90

Media Type:
1 *Plain
********************-
2
Transparency
3
Preprinted
Cassette (1 to 5) Set. (Settings for the cassettes)
To print correctly on paper supplied from the cassettes, use the procedure below to set the paper size and media type.
Set the cassette according to the paper size.
• Setting the standard paper size...4-28
• Setting the non-standard paper size...4-30
The options available in Cassette (1 to 5) Set. menu are as follows:
• Media Type (Setting the cassette paper type)...4-29
• Other Paper Size (Setting the Paper Size from the Operation Panel)...4-30
• Custom PaperSize (Setting a Custom Paper Size)...4-31
Setting the standard paper size
To set the standard sizes A5, A4, B5, Letter, Legal and A6 (paper cassette), the following operations are necessary.
• Setting the cassette paper size...4-28
• Media Type (Setting the cassette paper type)...4-29
Setting the cassette paper size
To set the standard sizes for the paper cassette, load the paper and turn the paper size dial so that the size of the paper
you are going to use appears in the paper size window. To adjust the paper width guides and the paper length guide of the
paper cassette, refer to Loading Paper into the Cassette on page 2-22.
If the PF-320 optional paper feeder is installed, use the same procedure to load paper into the paper feeder cassettes.
4
Press [OK]. The Media Type screen appears listing the media types
a b
that can be supplied from the MP tray.
The available media types are as follows:
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High Quality
CUSTOM 1 to 8
5
Press
6
Press [OK]. The media type for the MP tray is set and the MP Tray
Set. menu screen reappears.
4-28
or to select the desired media type.
Operation Panel