Kyocera FS-4100DN Operation Manual page 100

Use the procedure below to register the name to be displayed for the custom paper.
Media Type Set.:
********************- 1 Plain
2 Transparency
3 Preprinted
CUSTOM 1:
1 ********************- Paper Weight
2
Duplex
3 Name Entry
Name Entry:
*
Reset Type Adj. (Resets customized settings)
This resets all the settings specified in Media Type Set. (Paper type settings) on page 4-35.
Reset Type Adjust.
Are you sure?
[ Yes ] [
1
2
a b
[ Exit ]
3
4
a b
[ Exit ]
5
6
a b
S
ABC
[ Text ]
7
8
1
2
No ]
3
In the Paper Settings menu, press
Set..
Press [OK]. The Media Type Set. screen appears listing the
media types that can used with the printer.
Press or to select the custom paper (CUSTOM 1 to 8) for which
you want to register a name to display.
Press [OK]. A menu for the selected media is displayed.
Press or to select Name Entry.
Press [OK]. The Name Entry screen appears.
Use the numeric keys to enter the name to display for the custom
paper.
Note Up to 16 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
Press [OK]. Register the name to display and the renamed custom
paper screen reappears.
In the Paper Settings menu, press
Adj..
Press [OK]. A confirmation screen appears.
Press [Yes] ([Left Select]). The message Completed. appears
and the Paper Settings menu reappears.
Pressing [No] ([Right Select]) returns to the Paper Settings
menu without resetting the customized settings.
4-38
Operation Panel
or to select Media Type
or to select Reset Type