Advertisement
Installation Instructions for Stanley Omnilock Wall Mount Units
Figure 1
Applying the template
2
Planning the installation
Template
A
11/16 in
B
17 mm
C
11/16 in
17 mm
A
1 1/4 in
32 mm
A
B
C
A
Title
STANLEY OMNILOCK
Installation Template for OM Wall Mount Locks
OM1
Series
Backset
—
Trim style
Door thickness
—
Rev date
1/2010
number
Template
Rev
OM WMS
—
To ensure accurate door preparation, use only factory-printed templates. Do not use copies or facsimiles. T83322/Rev A– 0000000 ER-7991-42 Jan 2010
Stanley Omnilock
a Product Group of Stanley Security Solutions, Inc.
1
Position template and mark drill
points
Note: When determining the location of the unit,
take wheel chair access into consideration.
1 Open the template provided Installation Template
for Omnilock Wall Mount Units (T83322).
Note: If installing an Extreme Weatherized model,
see Installation Template for OM Wall Mount
System Extreme Weatherized Units (T83323). This
is the template for locating the extreme weatherized
module mounting holes.
2 Position the template on the wall, making sure
that the top edge is horizontal and the centerline
is vertical.
3 Tape the template to the wall. See Figure 1.
2
Center punch and drill holes
1 Center punch the necessary drill points. See the
instructions on the template.
2 Determine the hole sizes and anchors based on
the wall material.
3 Drill the holes.
Advertisement
